The Yack N972 KSP Wheeled Stairlift features versatile platforms, making it a nearly universal stairlift. Furthermore, this stairlift can accommodate a wide range of wheelchairs and be transported safely. Practical and easy to use, the ability to disassemble the machine into multiple parts makes it easy to transport.

Electronics at the service of convenience

The control panel display allows monitoring to ensure safety during operation. Messages on the interactive display guide and assist the operator to ensure correct and safe use of the vehicle. When the lift is turned on, the display shows the battery charge status, the incline level, and the ascent and descent speed.
The N970 series implements two new functions that allow you to enter your weight and step height directly from the control panel. These two parameters optimize movement on stairs, significantly improving ride comfort.

Emergency button

The new Yacks are equipped with acoustic alarms with information displayed on the screen, making them easier to use and even safer:

Low battery warning
Excessive load
Incorrect motor absorption
Anomalies in the functioning of the electronic board
Brake malfunctions
Excessive tilt of the machine during use
Stand by with acoustic alarm every 30 seconds
Available Models

Yack N972 – Max. step height 21 cm
Yack N972H – Max. step height 26 cm
Yack N972H1 – Max. step height 24 cm
Technical Features

New electronics that characterize the machine, improving its reliability and performance
Multifunction display on the control panel with integrated self-diagnosis and constant information to the user for assisted driving
Emergency button.
Seat belt.
Lower footrests for wheelchair accommodation, adjustable in width, anchored to the machine body
Upper attachment arm adjustable in width and height with articulated clamps
Height-adjustable headrests
Electronic Data

Motor: DC 220W
Battery: 2 x 12 v 5 Ah
Operating voltage: 24 V
Fuse: 20 A
Operating temperature: -10°C / +50°C
Noise: < 80 db
Hand-arm vibration: 2.5 m/sec2
Whole body vibration: 1 m/sec2
Charging voltage: 110V – 230V
Charger: external
Input voltage: 220V
Output voltage: 24V
Power consumption during charging: 50 W
Reserve autonomy: 20 steps

The total price includes training and instruction on how to use the stairlift provided by a trained technician.




barcode: 8055773184732
code: N972